How do I setup my BT Home Hub 3?

Changing wireless or SSID settings on your BT Business Hub 3

  1. Click the Settings tab.
  2. You will be asked to enter your admin password.
  3. Click on Wireless.
  4. Change your Security setting or set Broadcast SSID: to No. For example, to change to WEP from the more secure WPA:
  5. Click Apply.
  6. Click Yes.

What type of BT Hub have I got?

The black box in the top left-hand corner of the sticker will reveal which generation of the Home Hub you have.

How do I manage devices on my BT Hub?

How do I use BT access controls (Wi-Fi Controls)?

  1. Open a new web browser on your connected device and type 192.168.1.254 into the address bar.
  2. Click Advanced Settings.
  3. Click BT access control.
  4. Enter the admin password.
  5. Select the device you want to apply access controls to and click Set.
  6. Choose the start time and click Set.

What is the default gateway for a BT Home Hub?

The default IP address is 192.168. 1.254 but you can change that here. You can switch the Hub’s DHCP server on and off.

What is the newest BT Hub?

Smart Hub 2
The Smart Hub 2 provides 7 antennas uniquely positioned to maximise power, the latest Wi-Fi technology, smart channel selection, smart scan and clever app-based services to help them set up and manage their home Wi-Fi. BT Smart Hub 2 comes with 2 DECT antennas and integrated support for Ultrafast broadband (G.

How many devices can connect to BT Hub?

ten devices
This was described as the “BT Wireless Hub 1800HG”, or in some documentation as the “BT Wireless Home Hub 1800”. This provided one USB connection, four ethernet ports and Wi-Fi 802.11b or 802.11g wireless connection. A total of ten devices in any combination of these was supported.

How do I see who is connected to my BT router?

Tap on the disc and then press See Connected Devices, to show any devices connected to that disc. Tapping on any of the devices shown, will open Device Information. This is where you can update access controls (add or remove from a group, rename or block a device). The Admin password is needed to make changes.

Do I need a master socket for broadband?

It doesn’t have to be in the master socket, but Ideally it should be as you will get the best speed there. You will generally lose speed at the extensions. However, if you’re on a 40/10 package and close enough to the cabinet, you may well get the full 40/10 on the extension sockets anyway.

How long does BT installation take?

BT installation and activation times BT Broadband requires approximately two weeks lead time to set up broadband. It can be less if you have a landline, but if you need a landline installed as well as broadband, it could take around two to three weeks to arrange an engineer.